Join the community for a digital modeling, co-learning adventure! This beginner-accessible, social event is all about figuring things out together. We’ll start by screening a video or tutorial focused on one of the many 3D modeling software programs you can use to design objects for Laser-cutting, 3D Printing, CNC Routing, Milling, and Machining. As we watch, we’ll pause for questions and comments to further our understanding of these tools. After, we’ll have an open discussion about what we’ve learned.
We’ll use the second half of the evening to show-n-tell what we’re working on, give and get peer support, and share our own ideas and techniques.
Masks are required for this event. New Guests must have a Full Guest Account before this event starts. Add the FREE account set up on check out or click here.
Class Type: Exposure
Level: Beginner to Expert
Timing: 2 hours
Location: Suite 206 Clean Fab
Certification: None
Age: 16+ with Adult
Co-learning Topic: TBD
This event welcomes everyone from curious novices who’ve never used design software and don’t know where to start to Ace’s power users. You can just hang out and watch or ask questions. Folks are encouraged to bring in one project for show-n-tell, feedback, and troubleshooting.
Join the community for a digital modeling, co-learning adventure! This beginner-accessible, social event is all about figuring things out together. We’ll start by screening a video or tutorial focused on one of the many 3D modeling software programs you can use to design objects for Laser-cutting, 3D Printing, CNC Routing, Milling, and Machining. As we watch, we’ll pause for questions and comments to further our understanding of these tools. After, we’ll have an open discussion about what we’ve learned.
We’ll use the second half of the evening to show-n-tell what we’re working on, give and get peer support, and share our own ideas and techniques.
Masks are required for this event. New Guests must have a Full Guest Account before this event starts. Add the FREE account set up on check out or click here.
Class Type: Exposure
Level: Beginner to Expert
Timing: 2 hours
Location: Clean Fabrication
Certification: None
Age: 16+ with Adult
Co-learning Topic: coming soon
This event welcomes everyone from curious novices who’ve never used design software and don’t know where to start to Ace’s power users. You can just hang out and watch or ask questions. Folks are encouraged to bring in one project for show-n-tell, feedback, and troubleshooting.
Join the community for a digital modeling, co-learning adventure! This beginner-accessible, social event is all about figuring things out together. We’ll start by screening a video or tutorial focused on one of the many 3D modeling software programs you can use to design objects for Laser-cutting, 3D Printing, CNC Routing, Milling, and Machining. As we watch, we’ll pause for questions and comments to further our understanding of these tools. After, we’ll have an open discussion about what we’ve learned.
We’ll use the second half of the evening to show-n-tell what we’re working on, give and get peer support, and share our own ideas and techniques.
Masks are required for this event. New Guests must have a Full Guest Account before this event starts. Add the FREE account set up on check out or click here.
Class Type: Exposure
Level: Beginner to Expert
Timing: 2 hours
Location: Clean Fabrication
Certification: None
Age: 16+ with Adult
Co-learning Topic: Coming soon
This event welcomes everyone from curious novices who’ve never used design software and don’t know where to start to Ace’s power users. You can just hang out and watch or ask questions. Folks are encouraged to bring in one project for show-n-tell, feedback, and troubleshooting.
Join the community for a digital modeling, co-learning adventure! This beginner-accessible, social event is all about figuring things out together. We’ll start by screening a video or tutorial focused on one of the many 3D modeling software programs you can use to design objects for Laser-cutting, 3D Printing, CNC Routing, Milling, and Machining. As we watch, we’ll pause for questions and comments to further our understanding of these tools. After, we’ll have an open discussion about what we’ve learned.
We’ll use the second half of the evening to show-n-tell what we’re working on, give and get peer support, and share our own ideas and techniques.
Masks are required for this event. New Guests must have a Full Guest Account before this event starts. Add the FREE account set up on check out or click here.
Class Type: Exposure
Level: Beginner to Expert
Timing: 2 hours
Location: Suite 206 Clean Fab
Certification: None
Age: 16+ with Adult
Co-learning Topic: We’ll review two videos focused on techniques that improve the success of 3D Printing, avoid using supports, and avoid common pitfalls. We’ll be up in Clean Fab so the Ace 3D Printers will be at our disposal if we’d like to try something out.
This event welcomes everyone from curious novices who’ve never used design software and don’t know where to start to Ace’s power users. You can just hang out and watch or ask questions. Folks are encouraged to bring in one project for show-n-tell, feedback, and troubleshooting.
Join this casual gathering of folks interested in 3D modeling and designing objects for Laser-cutting, 3D Printing, CNC Routing, Milling, and Machining. This loosely structured, participatory evening begins with a beginner-accessible presentation focused on a specific program or fabrication technique (Intro to OpenSCAD, Intro to Slicing, Intro to V-Carve, etc…), followed by time for show-n-tell, questions, troubleshooting, and collaboration.
Masks are required for this event. New Guests must have a Full Guest Account before this event starts. Add the FREE account set up on check out or click here.
Class Type: Exposure
Level: Beginner to Expert
Timing: 2 hours
Location: Suite 206 Coworking/Textiles
Certification: None
Age: 16+ with Adult
Presentation Topic: Introduction to Fusion 360°
This event welcomes everyone from curious novices who’ve never used design software and don’t know where to start to Ace’s power users. You can just hang out and watch or ask questions. Folks are encouraged to bring in one project for show-n-tell, feedback, and troubleshooting.
Join this casual gathering of folks interested in 3D modeling and designing objects for Laser-cutting, 3D Printing, CNC Routing, Milling, and Machining. This loosely structured, participatory evening begins with a beginner-accessible presentation focused on a specific program or fabrication technique (Intro to OpenSCAD, Intro to Slicing, Intro to V-Carve, etc…), followed by time for show-n-tell, questions, troubleshooting, and collaboration.
Masks are required for this event. New Guests must have a Full Guest Account before this event starts. Add the FREE account set up on check out or click here.
Class Type: Exposure
Level: Beginner to Expert
Timing: 2 hours
Location: Suite 206 Coworking/Textiles
Certification: None
Age: 16+ with Adult
Presentation Topic: Adobe Illustrator for Laser Cutting presented by Rachel/Crafty (via zoom on the big screen)
This event welcomes everyone from curious novices who’ve never used design software and don’t know where to start to Ace’s power users. You can just hang out and watch or ask questions. Folks are encouraged to bring in one project for show-n-tell, feedback, and troubleshooting.
